Author:
Mojumder Soumyajit,Sikdar Soumya,Ghosh Subrata Kumar
Abstract
Purpose
Artificial biomaterials are implanted to the human body to support the structure depending upon the extent of deformity or damage. This paper aims to formulate an experimental approach to assess the suitability of materials that can be used in the manufacture of human implants.
Design/methodology/approach
Five different pin materials such as SS304, Alumina, HDPE, UHMWPE and Brass have been chosen to be suitable for implants. The tribological properties of the aforementioned materials have been tested on a simple pin-on-disc apparatus. EN31 was chosen as the disc material because its hardness value is much higher than that of the pin materials used. The test materials were constructed in the form of spherical end pins to have point contacts and to reduce the depth of wear.
Findings
It has been observed that the polymeric (HDPE and UHMWPE) and ceramic materials (Alumina) are much better than the traditional metallic materials. The wear rate is very low for these materials owing to their self-lubricating properties.
Practical implications
The experimental studies will help predict the performance and life of implant materials in the human body.
Originality/value
In most cases, SS316L that possesses nickel compositions is used as the disc material; SS316L is toxic to the human body. In the present study, a high carbon alloy steel with high degrees of hardness EN31 is used as a disc counter-face material.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献