Experimental investigation on influence of electrode vibrations on hardness and microstructure of 1018 mild steel weldments

Abstract

Purpose The purpose of this study is to explore the importance of vibrations during welding process. In recent years, welding has gained its supremacy in the field of production. The main set back of the welding process is induced residual stresses, which is a major cause for many welding defects. These defects can be minimized by post-weld heat treatment methods, which is a time consuming and laborious process. In the recent past, a technique of exciting the weld-pool by vibrating the work-pieces was also adopted to minimize the above-mentioned stresses. A novel technique of electrode vibration is another effective way of transferring the vibrations to the weld-pool to influence the induced residual stress. Design/methodology/approach In this research, the electrode is vibrated with the help of an electric motor. The specimens were prepared as per American Society for Testing and Materials standards and welded with varying frequencies and voltages. The weldments are tested for hardness along the weld bead and heat affected zone, also the microstructure of the fusion zone is analyzed. Findings It is observed that there is an improvement in the hardness because of the grain refinement, which is a result of proper excitation of the weld-pool. It is observed that there is an improvement in hardness test up to 28.69% when compared with the conventional welding process. The peak value of hardness is observed at a frequency of 4,450 Hz. This is because of fine grain structure at this frequency, which is observed through the microstructure analysis. Originality/value A novel technique is introduced to refine the weld-pool through electrode vibrations. To improve the hardness of the welded joints, vibrations play a major role by refining the grain structure. The vibrations are imparted with the help of a special equipment attached to the electrode.