Author:
Liu Yong,Zhang Jiang,Cui Junjie,Zheng Changsong,Liu Yajun,Shen Jian
Abstract
Purpose
In armored vehicles integrated transmissions, residual life prediction based on oil spectrum data is crucial for condition monitoring and reliability assessment. This paper aims to use the advantages of real-time and accurate prediction of binary Wiener process, the residual life prediction of clutch is studied.
Design/methodology/approach
First, combined with the wet clutch life test, the indicator elements Cu and Pb and the failure threshold of the residual life prediction of the clutch are extracted through the oil replacement correction of the spectral data of the whole life cycle; second, the correlation characteristics of indicating elements are analyzed by MATLAB Copula function, then the correlation function of residual life will be derived; third, according to the inverse Gaussian principle, the performance degradation mathematical models of the unary and binary Wiener processes of the above two indicator elements are established; finally, the maximum likelihood estimation method is used to estimate the parameters, and the monadic and binary performance degradation mathematical models are used to predict the residual life of the tested clutch.
Findings
By comparing the prediction results with the test results, with the passage of time, 81.25% of the predicted value error of the residual life prediction method based on the binary Wiener process is controlled within 20%, while 56.25% of the predicted value error of the residual life prediction method based on the unitary Wiener process is controlled within 20%. At the same time, the prediction accuracy of the binary prediction model is 2%–16.7% higher than that of the unitary prediction model.
Originality/value
This paper studies the residual life prediction theory of wet clutch, which can develop the theory and method of comprehensive transmission health monitoring, and provide theoretical and technical support for the construction of a reliable health management system for high-speed tracked vehicles.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Reference18 articles.
1. A case comparison of a proportional hazards model and a stochastic filter for condition-based maintenance applications using oil-based condition monitoring information;Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability,2008
2. Parameter estimation and remaining useful life prediction of lubricating oil with HMM;Wear,2017
3. A new condition monitoring and fault diagnosis method of engine based on spectrometric oil analysis;Wear,2011
4. Prediction of bearing residual life based on binary Wiener process;Chinese Journal of Scientific Instrument,2018
5. Study on no-load running-in wear of power-shift steering transmission based on oil spectrum analysis;Spectroscopy and Spectral Analysis,2009
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献