Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel

Abstract

Purpose This paper aims to analyse the effects derived from the presence of residual coolant from machining operations on the Directed Energy Deposition of AISI H13 tool steel and the quality of the resulting part. Design/methodology/approach In the present paper, the effectiveness of various cleaning techniques, including laser vaporising and air blasting, applied to different water/oil concentrations are studied. For this purpose, single-layer and multi-layer depositions are performed. Besides, the influence of the powder adhered to the coolant residues remaining on the surface of the workpiece is analysed. In all cases, cross-sections are studied in-depth, including metallographic, microhardness, scanning electron microscopy and crack mechanism analyses. Findings The results show that, although no significant differences were found for low oil concentrations when remarkably high oil concentrations were used the deposited material cracked, regardless of the cleaning technique applied. The crack initiation and propagation mechanisms have been analysed, concluding that the presence of oil leads to hydrogen induced cracking. Originality/value High oil concentration residues from previous machining operations in hybrid manufacturing led to hydrogen induced cracking when working with AISI H13 tool steel. The results obtained will help in defining future hybrid manufacturing processes that combine additive and subtractive operations.