Preliminary color characterization of HP Multi Jet Fusion additive manufacturing with different orientations and surface finish

Abstract

Purpose This study aims to evaluate the color accuracy of HP Jet Fusion 580 3D printing, comparing 3D-printed outcomes against original digital input colors. Design/methodology/approach A custom cyan, magenta, yellow and black (CMYK) and red, green, blue (RGB) color chart was applied to the top, bottom and side surfaces of a 3D model. Four of each model were 3D-printed on a HP Jet Fusion 580, and half the samples were finished with a cyanoacrylate gloss surface finish, while half were left in raw form. A spectrophotometer was used to document CIELAB (L*a*b*) data, and comparisons made to the original input colors, including calculation of ΔE. Findings The CMYK samples were significantly more accurate than RGB samples, and grayscale samples in both color spaces were the most accurate of all. Typically, CMYK swatches were darker than the input values, and gloss samples were consistently darker than raw samples. The chromaticity (a*b*) range was found to be significantly smaller than what can be achieved digitally, with highly saturated colors unable to be produced by the printer. Originality/value This is the first study, to the best of the authors’ knowledge, to characterize the full color spectrum possible with the HP Jet Fusion 580, recommending that designers use the CMYK color space when applying colors and textures to 3D models. A quick-reference color chart has been provided; however, it is recommended that future research focus on developing a color management profile to better map digital colors to the capabilities of the printer.