Author:
Demiryürek Oğuz,Koç Erdem
Abstract
PurposeThe purpose of this paper is to investigate the design dimensions in pressure or metering region of a single‐screw extruder by determining viscous power loss. The paper is the second part of a series.Design/methodology/approachViscous power loss formed in the extruder screw channel and the radial clearance is determined and evaluated in terms of non‐dimensional parameters in order to obtain a theoretical model.FindingsThe theoretical model developed is capable of estimating the viscous power loss in the extruder metering region. With the model developed, extruder geometry and viscous power loss under different operating conditions can be predicted.Originality/valueThis paper offers a quick and easy opportunity to examine the viscous power loss in the extruder.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Reference7 articles.
1. Demiryürek, O. and Koç, E. (2004), “Design basis of extruder used in textile industry and investigating the melting mechanism”, Cukurova University Journal of Faculty of Engineering and Architecture, Vol. 19 No. 2, pp. 1‐11 (in Turkish).
2. Guo, Y. and Chung, C.I. (1989), “Dependence of melt temperature on screw speed and size in extrusion”, Polymer Engineering and Science, Vol. 29 No. 6, pp. 415‐9.
3. Koç, E. and Demiryürek, O. (2009), “Design basis and hydrodynamic performance analysis of single‐screw extruders. I‐polymer flow behaviour”, Industrial Lubrication and Tribology, Vol. 61 No. 4, pp. 188‐96.
4. Kraybill, R.R. (1986), “Power for multi‐section melt screw extruders”, Polymer Engineering and Science, Vol. 15 No. 10, pp. 130‐725.
5. Raman, V., Chiruvella, Y., Jaluria, Y., Sernas, V. and Esseghir, M. (1996), “Extrusion of non‐Newtonian fluids in a single‐screw extruder with pressure back flow”, Polymer Engineering and Science, Vol. 36 No. 3, p. 358.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献