Author:
Seehanam Wirapan,Pianthong Kulachate,Sittiwong Wuttichai,Milton Brian
Abstract
Purpose
– The purpose of this paper is to describe a procedure to simulate impact-driven liquid jets by computational fluid dynamics (CFD). The proposed CFD model is used to investigate nozzle flow behavior under ultra-high injection pressure and jet velocities generated by the impact driven method (IDM).
Design/methodology/approach
– A CFD technique was employed to simulate the jet generation process. The injection process was simulated by using a two-phase flow mixture model, while the projectile motion was modeled the moving mesh technique. CFD results were compared with experimental results from jets generated by the IDM.
Findings
– The paper provides a procedure to simulate impact-driven liquid jets by CFD. The validation shows reasonable agreement to previous experimental results. The pressure fluctuations inside the nozzle cavity strongly affect the liquid jet formation. The average jet velocity and the injection pressure depends mainly on the impact momentum and the volume of liquid in the nozzle, while the nozzle flow behavior (pressure fluctuation) depends mainly on the liquid volume and the impact velocity.
Research limitations/implications
– Results may slightly deviate from the actual phenomena due to two assumptions which are the liquid compressibility depends only on the rate of change of pressure respected to the liquid volume and the super cavitation process in the generation process is not taken into account.
Practical implications
– Results from this study will be useful for further designs of the nozzle and impact conditions for applications of jet cutting, jet penetration, needle free injection, or any related areas.
Originality/value
– This study presents the first success of employing a commercial code with additional user defined function to calculate the complex phenomena in the nozzle flow and jet injection generated by the IDM.
Subject
Computational Theory and Mathematics,Computer Science Applications,General Engineering,Software
Reference17 articles.
1. Baker, A.B.
and
Sanders, J.E.
(1999), “Fluid mechanics analysis of a spring-loaded jet injector”, IEEE Transactions on Biomedical Engineering, Vol. 46 No. 2, pp. 235-242.
2. Bowden, F.P.
and
Brunton, J.H.
(1961), “The deformation of solids by liquid impact at supersonic speeds”, Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences, Vol. 263 No. 1315, pp. 433-450.
3. Fluent Inc.
(2006), FLUENT 6.3 User's Guide, Fluent Inc, Lebanon.
4. Harris, H.D.
and
Mellor, M.
(1974), “Cutting rock with water jets”, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 11 No. 9, pp. 343-358.
5. Jou, M.
(2000), “Analysis of the stability of water-jet cutting with linear theory”, Journal of Materials Processing Technology, Vol. 104 Nos 1/2, pp. 17-20.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献