Optimizing the weld bead characteristics of super austenitic stainless steel (904L) through grey‐based Taguchi method

Abstract

PurposeThe purpose of this paper is to optimize the gas metal arc welding (GMAW) process input parameters simultaneously considering the multiple output variables (bead width (BW), bead height (BH) and depth of penetration (DP)).Design/methodology/approachGrey‐based Taguchi approach was used for designing the experiment, L27 orthogonal array was used which composed of three levels and 27 rows, which means that 27 experiments were carried out. Design of experiments was selected based on a four welding parameters with three levels each. The selected welding parameters for this paper are gas flow rate, voltage, travel speed and wire feed rate. The bead‐on‐plate welding trials are carried out on AISI 904L super austenitic stainless steel (SASS) sheets and evaluate the shape of the fusion zone depends upon a number of input parameters.FindingsBead‐on‐plate welding of 904L SASS sheet is successfully performed (without any cracks and discontinuity) by GMAW process and the bead profiles are measured. The predicted bead profiles have the better DP and lower BH and BW. It is found that the optimized setting values are improving the response values by 10 per cent.Originality/valueThe optimal welding conditions are identified in order to increase the productivity and minimize the total operating cost. The process input parameters effect is determined under the optimal welding combinations.