Abstract
Purpose
The study of the friction law and wear characteristics of the middle trough material can better select the appropriate material for the scraper conveyor of fully mechanized working face and provide theoretical support for the wear-resistant treatment technology.
Design/methodology/approach
This paper investigated friction and wear of the middle trough in a scraper conveyor under different media. Lignite, coking coal and anthracite were selected media, and middle trough wear was maximum for anthracite and minimum for lignite, with coking coal being intermediate.
Findings
Wear increased linearly with increasing load nonlinearly with increasing sliding speed. Middle trough wear also increased with increasing media granularity up to approximately 0.4 mm (40 mesh), but had little effect beyond that.
Originality/value
It can provide a reference for the scraper conveyor running resistance. At the same time, it has great social significance and economic benefits for the safe, green and efficient coal mine industrial adjustment, etc.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Reference11 articles.
1. Study on wear of scraper conveyor chute;International Conference on Intelligent Systems Research and Mechatronics Engineering,2015
2. Calibration and validation of a large scale abrasive wear model by coupling DEM-FEM: local failure prediction from abrasive wear of tipper bodies during unloading of granular material;Engineering Failure Analysis,2016
3. Self-strengthening wear resistant mechanism and application of medium manganese steel applied for the chute of scraper conveyor;Journal of China Coal Society,2016
4. Technology status and development tendency of scraper conveyor in mining face,2007
5. Abrasive wear resistance of some commerical abrasion resistant steels evaluated by labory test methods;Wear,2009
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献