Study on the prediction method and the flow characteristics of gas-liquid two-phase flow patterns in the suction chamber

Abstract

Purpose The purpose of this paper is to propose a prediction method of gas-liquid two-phase flow patterns and reveal the flow characteristics in the suction chamber of a centrifugal pump. Design/methodology/approach A transparent model pump was experimentally studied, and the gas-liquid two-phase flow in the pump was numerically simulated based on the Eulerian–Eulerian heterogeneous flow model. The numerical simulation method was verified from three aspects: the flow pattern in the suction chamber, the gas spiral length and the external characteristics of the pump. The two-phase flow in the suction chamber was studied in detail by using the numerical simulation method. Findings There are up to eight flow patterns in the suction chamber. However, at a certain rotational speed, only six flow patterns are observed at the most. At some rotational speeds, only four flow patterns appear. The gas spiral length has little relationship with the gas flow rate. It decreases with the increase of the liquid flow rate and increases with the increase of the rotational speed. The spiral flow greatly increases the turbulence intensity in the suction chamber. Originality/value A method for predicting the flow pattern was proposed. Eight flow patterns in the suction chamber were identified. The mechanism of gas-liquid two-phase flow in the suction chamber was revealed. The research results have reference values for the stable operation of two-phase flow pumps and the optimization of suction chambers.