The effect of the hydrodynamic and temperature on corrosion rate of API steels exposed to oilfield produced water

Abstract

PurposeThe purpose of this paper is to study the corrosion rate for X52, X60, X65, X70 and X80 steel immersed in Mexican oilfield produced water. For the electrochemical characterization of the five steels rotating disk electrodes, 20°C, 30°C and 45°C of experimental temperature and 0, 500, 1,000 and 2,000 rpm of rotation speed were taken into account. The temperature dependence was analyzed using Arrhenius law. Thus, Rct values obtained from EIS data in comparison with the corrosion rate obtained from polarization curves data were taken into account. Hydrodynamic effects were analyzed by Rct and corrosion rate data.Design/methodology/approachElectrochemical impedance spectroscopy and potentiodynamic polarization techniques were used to assess the electrochemical behavior for five pipe steels steel immersed in a natural solution.FindingsThe resistance and corrosion rate taken from electrochemical tests decreased as temperature and hydrodynamic condition also decreased. In addition, the Arrhenius parameter revealed that the natural solution increased the corrosion rate as the activation energy decreased. Typical branches related to reduction-oxidation reaction (dissolution-activation process or corrosion products dissolution) on steel surface were discussed. Optical images analysis shows that corrosion products for X65 steel exposed to oilfield produced water can be attributed to more susceptibility to corrosion damage for this steel grade (Quej-Ake et al., 2018), which is increased with the temperature and rotation speed of the working electrode.Originality/valueCorrosion process of the five steels exposed to oilfield produced water could be perceptive when Arrhenius analysis is taken into account. This is because oilfield produced water is the most aggressive condition (brine reservoir and sour water) for internal pipelines walls and storage tanks (brine tanks). Thus, stagnant condition was considered as a more extreme corrosive condition because produced water is stored in atmospheric stationary tanks as well as it is transported under laminar condition in zones where oilfield produced water is maintaining in the bottom of the pipe during the production, transporting and storing of the crude oil. In addition, a brief operational process for Reynolds number and the flowrate of the stock tank barrel per day (Q in STBD) using field and Reynolds number data is discussed.