Preparation of a photocurable hydrogel with adjustable mechanical properties for 3D printing

Abstract

Purpose This paper aims to show a series of hydrogels with adjustable mechanical properties, which can be cured quickly with visible light. The hydrogel is prepared conveniently with hydroxyethyl acrylate, cross-linker, gelatin and photoinitiator, and can be printed into certain 3D patterns with the direct ink write (DIW) 3D printer designed and developed by the research group. Design/methodology/approach In this paper, the authors designed a composite sensitization initiation system that is suitable for hydrogels. The concentration of photoinitiator, gelatin and cross-linker was studied to optimize the curing efficiency and adjust the mechanical properties. A DIW 3D printer was designed for the printing of hydrogel. Pre-gel solution was loaded into printer for printing into established models. The models were made and sliced with software. Findings The hydrogels can be cured efficiently with 405-nm visible light. While adding various content of gelatin and cross-linker, the mechanical properties of hydrogels show from soft and fragile (elastic modulus of 121.18 kPa and work of tension of 218.11 kJ·m−3) to rigid and tough (elastic modulus of 505.15 kPa and work of tension of 969.00 kJ·m−3). The hydrogels have high capacity of water absorption. With the DIW 3D printer, pre-gel hydrogel solution can be printed into objects with certain dimension. Originality/value In this work, a composite sensitization initiation system was designed, and fast curing hydrogels with adjustable mechanical properties had been prepared conveniently, which has high equilibrium water content and 3D printability with the DIW 3D printer.