Author:
Stanković Miloš,Kolarević Nenad,Davidovic Nikola,Miloš Marko
Abstract
Purpose
The purpose of this paper is to improve the lubrication and remove as much as possible of the heat generated in the bearing assembly, embedded in the jet engine.
Design/methodology/approach
To determine the necessary values of the air pressure and oil amount, an experimental approach is used. For that purpose, a custom made test rig is developed.
Findings
Less amount of oil makes better lubrication conditions, reflected in the smaller temperature of the bearings. Concerning the air pressure, too high and too low air pressure deteriorates the lubrication parameters. An optimum value should be determined experimentally. The influence of oil amount is remarkably bigger than the influence of air pressure.
Originality/value
This experimental investigation provides an easy and fast way to improve the high-speed bearings lubrication parameters.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Reference18 articles.
1. 2kwy.net (2021), “TDS_aeroshell turbine oil 500”, available at: http://2kwy.net/pds/pdf/TDS_aeroshell%20turbine%20oil%20500.pdf (accessed 28 September 2021).
2. Analysis and experimental research on the fluid–solid coupled heat transfer of high‐speed motorized spindle bearing under oil–air lubrication;ASME. J. Tribol,2021
3. Temperature rise of hybrid ceramic and steel ball bearings with oil-mist lubrication;Lubrication Engineering; Park Ridge,2000
4. Development of a grease lubrication system for an expendable small turbomachine;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,1999
5. Effect of collar and bevel angle in mixing enhancement of mach 1.76 jet exiting from a convergent-divergent nozzle;Applied Engineering Letters: Journal of Engineering and Applied Sciences,2021
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献