Hardware implementation of a novel hybrid MPPT technique for fast tracking of GMPP in solar PV system under PSCs

Abstract

Purpose To generate electricity, solar photovoltaic (PV) systems are among the best, most eco-friendly and most cost-effective solutions available. Extraction of maximum possible electricity from the solar PV system is complicated by a number of factors brought on by the ever-changing weather conditions under which it must operate. Many conventional and evolutionary algorithm-based maximum power point tracking (MPPT) techniques have the limitation of not being able to extract maximum power under partial shade and rapidly varying irradiance. Hence, the purpose of this paper is to propose a novel hybrid slime mould assisted with perturb and observe (P&O) global MPPT technique (HSMO) for the hybrid bridge link-honey comb (BL-HC) configured PV system to enhance the better maximum power during dynamic and steady state operations within less time. Design/methodology/approach In this method, a hybridization of two algorithms is proposed to track the true with faster convergence under PSCs. Initially, the slime mould optimization (SMO) algorithm is initiated for exploration of optimum duty cycles and later P&O algorithm is initiated for exploitation of global duty cycle for the DC–DC converter to operate at GMPP and for fast convergence. Findings The effectiveness of the proposed HSMO MPPT is compared with adaptive coefficient particle swarm optimization (ACPSO), flower pollination algorithm and SMO MPPT techniques in terms of tracked GMPP, convergence time/tracking speed and efficacy under six complex partial shading conditions. From the results, it is noticed that the proposed algorithm tracks the true GMPP under most of the shading conditions with less tracking time when compared to other MPPT techniques. Originality/value This paper proposes a novel hybrid slime mould assisted with perturb and observe (P&O) global MPPT technique (HSMO) for the hybrid BL-HC configured PV system enhance the better maximum power under partial shading conditions (PSCs). This method operated in two stages as SMO for exploration and P&O for exploitation for faster convergence and to track true GMPP under PSCs. The proposed approach largely improves the performance of the MPP tracking of the PV systems. Initially, the proposed MPPT technique is simulated in MATLAB/Simulink environment. Furthermore, an experimental setup has been designed and implemented. Simulation results obtained are validated through experimental results which prove the viability of the proposed technique for an efficient green energy solution.