Evaluation of a coach door under a frontal impact

Abstract

PurposeThe vehicle´s body front pillar should absorb most of the striker kinetic energy, while only a fraction of that is absorbed by the door structure. This study aims to discuss the aforementioned issue. In this test the striker is a virtual entity. Six uniaxial strain gauges are installed throughout the door. Additionally, contactless 3D digital image correlation (DIC) allows to assess the major door panel’s continuous deformation and strain fields.Design/methodology/approachA coach is a large and heavy long-distance passenger transport vehicle. Their structural certification, classifies coaches as M3 Class III vehicles. New coach structures’ designs need analyses of each sub-system for critical pre-validation of the entire structure, aiming driver and passenger carrier safety. Also, a thorough examination due to increased travel speed is needed.FindingsExperimental pseudo-dynamic (PSD) results were compared and validated using finite element method (FEM) with two pieces of distinct FEM software (Abaqus® and PamCrash®). The time dependent solution was carried out by explicit techniques. Results by FEM and PSD test showed good agreement, evidencing the reliability of the tools selected. Results by PamCrash® were closer to the experimental data.Practical implicationsR-29 is truck-only regulation, however can be adapted to coaches in case of a frontal collision. The present work focuses on the impact behavior of the passenger front door subsystem.Originality/valueAs a first validation the entire structure, the behavior of a vehicle door, under in-plane impacts was studied. The corresponding deformation energy absorbed by the frontal passenger coach door under virtual impacts of a swinging striker was assessed using a PSD approach.