Fatigue life assessment of crankshaft with increased horsepower

Abstract

Purpose The purpose of this paper is to analyze the fatigue life of the crankshaft in an engine with increased horsepower. Design/methodology/approach The applied load on the powertrain components was calculated through a dynamic analysis. Then, to estimate the induced stress in every crank angle, the calculated loads in different engine speeds were applied on the crankshaft. Finally, the critical plane fatigue theories in addition to URM standard were used to estimate the damage and fatigue life of the crankshaft with the increased power. Findings It was found that a simultaneous increase of gas pressure and engine speed by 30 percent will cause an increase of maximum applied load on the crankshaft by 25 percent. It was also found that while the results of finite element (FE) method predict an infinite life for the crankshaft after increasing the power, the URM method predicts an engine failure for the increased power application. In this study, the crankpin fillet is introduced as the most critical area of the crankshaft. Originality/value Increasing the power of the internal combustion engines without changing its main components has been of high interest; however, the failure associated with the increased load as the result of increased power has been a big challenge for that purpose. Moreover, although URM standard provided an efficient practice to evaluate a crankshaft fatigue life, using FE analysis may provide more reliability.