Author:
Patrício T.,Domingos M.,Gloria A.,D'Amora U.,Coelho J.F.,Bártolo P.J.
Abstract
Purpose
– The main purpose of this research work is to study the effect of poly lactic acid (PLA) addition into poly (e-caprolactone) (PCL) matrices, as well the influence of the mixing process on the morphological, thermal, chemical, mechanical and biological performance of the 3D constructs produced with a novel biomanufacturing device (BioCell Printing).
Design/methodology/approach
– Two mixing processes are used to prepare PCL/PLA blends, namely melt blending and solvent casting. PCL and PCL/PLA scaffolds are produced via BioCell Printing using a 300-μm nozzle, 0/90° lay down pattern and 350-μm pore size. Several techniques such as scanning electron microscopy (SEM), simultaneous thermal analyzer (STA), nuclear magnetic resonance (NMR), static compression analysis and Alamar BlueTM are used to evaluate scaffold's morphological, thermal, chemical, mechanical and biological properties.
Findings
– Results show that the addition of PLA to PCL scaffolds strongly improves the biomechanical performance of the constructs. Additionally, polymer blends obtained by solvent casting present better mechanical and biological properties, compared to blends prepared by melt blending.
Originality/value
– This paper undertakes a detailed study on the effect of the mixing process on the biomechanical properties of PCL/PLA scaffolds. Results will enable to prepare customized PCL/PLA scaffolds for tissue engineering applications with improved biological and mechanical properties, compared to PCL scaffolds alone. Additionally, the accuracy and reproducibility of by the BioCell Printing enables to modulate the micro/macro architecture of the scaffolds enhancing tissue regeneration.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference30 articles.
1. Ahmed, F.
and
Discher, D.E.
(2004), “Self-porating polymersomes of PEG-PLA and PEG-PCL: hydrolysis-triggered controlled release vesicles”, Journal of Controlled Release, Vol. 96 No. 1, pp. 37-53.
2. Atala, A.
(2007), “Engineering tissues, organs and cells”, Journal of Tissue Engineering and Regenerative Medicine, Vol. 1 No. 2, pp. 83-96.
3. Bártolo, P.
,
Domingos, M.
,
Gloria, A.
and
Gay, J.
(2011), “BioCell printing: integrated automated assembly system for tissue engineering constructs”, CIRP Annals Manufacturing Technology, Vol. 60 No. 1, pp. 271-274.
4. Bártolo, P.
,
Almeida, A.
,
Rezende, R.
,
Laoui, T.
and
Bidanda, B.
(2008), “Advanced processes to fabricate scaffolds”, in
Bidanda, B.
and
Bártolo, P.
(Eds), Virtual Prototyping & Bio Manufacturing in Medical Applications, Springer, Berlin.
5. Choong, C.
,
Triffitt, J.T.
and
Cui, Z.F.
(2004), “Polycaprolactone scaffolds for bone tissue engineering – effects of a calcium phosphate coating layer on osteogenic cells”, Food and Bioproducts Processing, Vol. 82 No. 2, pp. 117-125.
Cited by
112 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献