Tribological behaviors of HfC coating prepared on 45 steel via double glow plasma surface metallurgy technique

Abstract

Purpose 45 steel is a common material for the manufacture of various components such as shafts or gears. However, its poor surface properties often limit its applications. The purpose of this paper is to find a way to enhance the surface performance of 45 steel, which is expected to improve the wear resistance of 45 steel. Design/methodology/approach Double glow plasma surface metallurgy technique was used to prepare hafnium carbide (HfC) coatings on the surface of the 45 steel with two preparation process; one is to diffuse two elements together, while the other is to diffuse step by step. The scanning electronic microscopy and the X-ray diffraction were used to analyze the morphology and phase of the HfC coatings. And then the wear tests were carried out for this coating. Findings Coating diffused step by step shows better performance; it has a 15-µm alloyed layer which is uniform and dense and its hardness can reach up to 1326.5 Vickers-hardness (HV). While the coating fabricated by diffusing elements together owns a 10-µm alloyed layer and its hardness is 1204.1 HV. According to the wear test results, both coatings have a protective effect on the substrate and the coating prepared by step-by-step diffusion process has less wear volume, indicating that it possesses better friction reduction. Originality/value A new method which diffuses elements together was successfully used to prepare compound HfC coating, which can reduce the cost of coating preparation and improve the efficiency of coating preparation.