Vegetable oil-based cutting fluids and its behavioral characteristics in machining processes: a review

Abstract

Purpose This paper aims to provide a detailed review of various cutting fluids (CFs). Design/methodology/approach Friction and wear are inevitable in machine parts in motion. The industrial sector uses various kinds of lubricants, which include engine oils, CFs, hydraulic fluids, greases, etc. to control friction and wear. The main purpose of using CF is to remove heat produced during machining and to reduce cutting forces, tool wear and energy associated with it. Thus, it increases the productivity and quality of the manufacturing process. But more than 80% of the CFs used in the industries now are mineral oil-based. These mineral oils and additives are highly undesirable because of their toxicity, nonbiodegradability, pollution and ecological problems. Hence, these petroleum-based oils in the lubrication system can be substituted with alternatives such as vegetable-based CF. Several studies are being conducted in the field of eco-friendly CFs. Because of the variance in fatty acid profile and availability, the selection of vegetable oils (VOs) is another problem faced nowadays. The present study is focused on bio-based oils and many eco-friendly additives. Various machining processes and comparisons relating to the same have also been made. The aim is to minimize the use of mineral oil and thereby introduce sustainability in production. Findings In this present study, bio-based oils, additives and various characteristic behavior of them in machining are being discussed. The VOs are found to be a potential base oil for industrial CFs. Originality/value This paper describes the importance of sustainable CFs.