Fractal model of thermal contact conductance of the involute arc cylindrical gear considering friction coefficient-Reference-Cited by-同舟云学术

Fractal model of thermal contact conductance of the involute arc cylindrical gear considering friction coefficient

Published:2024-01-19 Issue:1 Volume:43 Page:137-148
ISSN:0332-1649
Container-title:COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
language:en
Short-container-title:COMPEL

Author:

Sun Xianguang,Xin Xicheng

Abstract

Purpose The purpose of this study is to propose a fractal model of thermal contact conductance (TCC) of the involute arc cylindrical gear considering friction coefficient. Design/methodology/approach The influences of fractal dimension, fractal roughness and surface modification coefficient on the TCC of the rough surface were studied. Findings The results indicate that increasing the fractal dimension or reducing the fractal roughness enhances the TCC of the rough surface, and raising the surface correction coefficient contributes to this improvement. Originality/value In this work, the novelty of the work is that the authors first established a novel fractal model of TCC of the involute arc cylindrical gear considering friction coefficient. The achievements of this study provide some theoretical basis for the investigation of the TCC of the involute arc cylindrical gear.

Publisher

Emerald

Reference20 articles.

1. Thermal contact conductance of elastically deforming nominally flat surfaces using fractal geometry;Industrial Lubrication and Tribology,2013

2. An analytical model of thermal contact resistance based on the weierstrass—mandelbrot fractal function;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2010

3. A contact stiffness model of machined plane joint based on fractal theory;Journal of Tribology,2010

4. Study on thermal contact resistance at liquid–solid interface based on fractal theory;AIP Advances,2021

5. Liou, J. (2006), “The theoretical study for microcontact model with variable topography parameters”, Tiwan: National Cheng Kung University, PhD Thesis.