Sequential laminated tooling, joined by brazing, for injection moulding-Reference-Cited by-同舟云学术

Sequential laminated tooling, joined by brazing, for injection moulding

Published:1999-06-01 Issue:2 Volume:5 Page:89-93
ISSN:1355-2546
Container-title:Rapid Prototyping Journal
language:en
Short-container-title:

Author:

Bryden B.G.,Pashby I.R.

Abstract

This paper outlines a method of sequentially joining steel laminations together using a high strength brazed joint to produce laminated tools. Individual joints were produced by using a heated platen rather than a furnace. Lap shear test samples were used to evaluate the tensile strengths of bonded laminates. Two laminate gauges were tested, 0.8mm and 1.6mm. Ranging trials were undertaken to determine optimum time to produce the joint. Constants for the trials were platen temperature, laminate material, braze material, joint area and joining pressure. At optimum conditions, that is the least time taken for highest tensile strength, the 0.8mm laminate averaged a strength of 4.7kN in 120 seconds’ heating time and the 1.6mm laminate averaged 9.3kN in 210 seconds.

Publisher

Emerald

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Reference5 articles.

1. Dickens, P.M. (1997), “Principles of design for laminated tooling”, International Journal of Production Research, Vol. 35 No. 5, Dearborn, MI, pp. 1349 ‐ 57.

2. Jacobs, P.F. (1996), “Stereolithography and other RP and manufacturing technologies: from rapid prototyping to rapid tooling”, Society of Manufacturing Engineers, Dearborn, MI, p. 368.

3. Kunieda, M. and Nakagawa, T. (1984), “Manufacturing of laminated deep drawing dies by laser beam cutting”, Japan Society for Technology and Plasticity, Vol. 1, pp. 520‐5.

4. Nakagawa, T., Kunieda, M. and Sheng‐Dong, L. (1985), “Laser cut sheet laminated forming dies by diffusion bonding”, Proceedings of the 25TH MTDR Conference, pp. 505‐10.

5. Walczek, D.F. and Hardt, D.E. (1994), “A new rapid tooling method for sheet metal forming dies”, Proceedings of the 5th International Conference on Rapid Prototyping, Dayton, OH, pp. 275‐88.

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. DIRECT MANUFACTURING OF METAL PARTS USING LOM-TECHNOLOGY;Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY);2018-04-06

2. Identification of mechanical properties of CuSil-steel brazed structures joints: a numerical approach;Journal of Adhesion Science and Technology;2013-06-21

3. Application of laser joining process for elimination of stair steps in steel laminate tooling;The International Journal of Advanced Manufacturing Technology;2004-04-07

4. Rapid Tooling for Injection Moulding Process;Materials Science Forum;2004-03

5. Rapid laminated die‐cast tooling;Assembly Automation;2003-12