Effect of non-uniform skin of “Walter” on the evaporative resistance and thermal insulation of clothing

Abstract

Purpose The purpose of this paper is to compare the evaporative resistance and thermal insulation of clothing measured by thermal manikin “Walter” using uniform and non-uniform skin. Design/methodology/approach The non-uniform skin with different perspiration rates was made by laminating a silicone layer on the inner side of a uniform skin. The thermal manikin was then covered with prepared non-uniform skin as well as uniform one. Four types of clothing ensembles were tested. Findings The relative intensity of perspiration rate was realized in different part of “Walter” skin, which was close to the perspiration rate of human being. There was a strong correlation between uniform skin and non-uniform skin. The thermal insulation and evaporative resistance of clothing measured on the non-uniform skin were higher than the ones determined on the uniform skin. However, their moisture permeability index showed the reversed tendency. Research limitations/implications The implication of the research is to investigate the differences between uniform skin and non-uniform skin for manikin “Walter.” This is possibly useful in correcting and predicting more accurate thermal insulation and evaporative resistance of clothing measured by “Walter” with a uniform skin in future. Originality/value It was more accurate using non-uniform skin in evaluating thermal and wet comfort comparing to uniform skin.