Relating deformation parameters test research of mortar and limestone cooled to cryogenic temperatures

Abstract

PurposeThe coefficient of thermal expansion (CTE) and modulus of elasticity (ME) values of mortar and stone from room temperature to cryogenic temperatures provide an experimental basis for the design of liquefied natural gas (LNG) storage tanks.Design/methodology/approachThe CTE and ME of mortar and limestone were measured by resistance strain gauge testing technology at cryogenic temperatures.FindingsThe test results showed that CTE values of mortar and stone decreased with the decrease of temperature and CTE values of mortar was greater than that of stone from 0 °C to −165 °C. The ME values of mortar increased significantly at cryogenic temperatures, and less change in stone.Originality/valueThe material at cryogenic temperatures may continue to work in the elastic phase due to the continuous increase of elastic modulus. Therefore, the study of material in the elastic stage may be more important than in the ultimate bearing capacity stage, and it is necessary to carry out further study surrounding the deformation properties of materials at cryogenic temperatures. The CTE and ME values of mortar and stone from room temperature to cryogenic temperatures provide an experimental basis for the design of LNG storage tanks.