Author:
Mathias David,Hicks Ben,Snider Chris
Abstract
AbstractPhysical prototyping is critical activity in the produce development process, but the cost and time required to produce prototypes hinders it use in the design process. Hybrid prototyping through coupling LEGO and FDM printing is presented as an approach to address these issues. After establishing the separate design rules for FDM printing and LEGO, this paper created new set of rules called Design for Fabrication (DfF) for hybrid prototyping. These cover the three main considerations (Technical, Process, and Design) that the designer and process planning must include to practically implement LEGO and FDM hybrid prototyping. The DfF rules were considered in a prototype of a computer mouse. While the fabrication time was not reduced as expected, it showed that the rules could be practically implemented in a real-world example. Additional considerations were identified that are to be included in the DfF rules.Further work is required to realise the predicted step-change reduction in fabrication time. The first approach is to leverage multiple printers to parallelise the printing. The second is to reduce fidelity while maintaining high fidelity in key regions of interest.
Publisher
Cambridge University Press (CUP)
Reference28 articles.
1. The LEGO Group. (2013), “LEGO Architecture Studio”. The LEGO Group.
2. Materializing design: the implications of rapid prototyping in digital design
3. Prototype for X (PFX): A holistic framework for structuring prototyping methods to support engineering design
4. James Dyson Foundation. (2010), “Engineering Box - Teacher's Pack”. James Dyson Foundation. Retrieved from http://www.jamesdysonfoundation.co.uk/resources/engineering-box-teachers-pack/