Modeling and assessment of the backlash error of an industrial robot

Abstract

SUMMARYThis paper proposes an experimental approach for evaluating the backlash error of an ABB IRB 1600 industrial serial robot under various conditions using a laser interferometer measurement instrument. The effects of the backlash error are assessed by experiments conducted on horizontal and vertical paths. A polynomial model was used to represent the relationship between the backlash error and the robot configuration. A strategy based on statistical tests was developed to choose the degree of polynomial representing the effect of the tool center point (TCP) speed and payload. Results show that the backlash error strongly affects the repeatability of the industrial robot. Statistical analyses prove that the backlash is highly dependent on both robot configuration and TCP speed, whereas it remains nearly unaffected by changes in the payload. It was discovered that the backlash error as measured at the TCP may exceeds 100 μm, and that the positive backlash error increases and the negative backlash error decreases when there is increase in TCP speed.