The Effect of Base Bleed on the Flow behind a Two-Dimensional Model with a Blunt Trailing Edge

Abstract

SummaryThe effects of base bleed on the flow about a two-dimensional model with a blunt trailing edge were examined at Reynolds numbers, based on model base height, between 1·3×104 and 4·1×104. The ratio of boundary layer thickness at the trailing edge to half the model base height was approximately 0·4. Measurements were made of base pressure, vortex shedding frequency and the distance to vortex formation. With a sufficiently large bleed quantity the regular vortex street pattern disappeared and the base drag of the section was reduced to about a third of its value without bleed. The base pressure was found to vary linearly with the inverse of the vortex formation distance. Results of a previous splitter plate investigation were found to agree closely with those of the present experiments.