Abstract
To reduce the operational complexity of the multipath estimating delay lock loop (MEDLL) and improve its anti-multipath performance for strobe correlators, a combination anti-multipath scheme, namely, the MEDLL on-strobe correlation technique, is proposed for global navigation satellite system (GNSS) signal processing. Short-delay multipath rays are separated from the strobe correlation function by the MEDLL mechanism; the dot product between the estimation residue and the standard correlation function or the BOC-PRN correlation function is then computed to eliminate the potential tracking ambiguity. Finally, this non-coherent combination result is sent to the loop filter to obtain anti-multipath code tracking. The proposed method is analysed via simulator data with a software receiver under different front-end bandwidth conditions. The results corroborate the better multipath mitigation capability and lower computational burden, although it is still difficult to eliminate all multipath interference, especially when the front-end bandwidth is insufficient.
Publisher
Cambridge University Press (CUP)
Subject
Ocean Engineering,Oceanography
Reference26 articles.
1. A Design Method of Code Correlation Reference Waveform in GNSS Based on Least-Squares Fitting
2. McGraw, G. A. and Braasch, M. S. (1999). GNSS Multipath Mitigation Using Gated and High Resolution Correlator Concepts. Proceedings of the 1999 National Technical Meeting of The Institute of Navigation, San Diego, CA, January 1999, 333–342.
3. Estimation of multipath parameters in wireless communications
4. Multipath analysis of GNSS measured data based on TK-MEDLL;Yang;Journal of Navigation and Positioning,2017
5. Cannon, M. E. , Lachapelle, G. , Qiu, W. and Frodge, S. L. (1994). Performance Analysis of a Narrow Correlator Spacing Receiver for Precise Static GPS Positioning. Position Location and Navigation Symposium. IEEE, Las Vegas, NV, USA, 11–15 April 1994, 360–361.
Cited by
14 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献