Adaptive triple-fed antenna and thinned RF-chip integration into ultra thin flexible polymer foil

Abstract

AbstractAttaching a wireless transmission system comprising a radio frequency (RF)-chip and a dipole antenna to dielectric material of largely different permittivity leads to strong variation of the antenna feed impedance. Due to the severe impedance mismatch between the RF-chip and the antenna, the performance of the system may deteriorate drastically. The proposed antenna provides three feed points, which show respective feed-point match to 100 Ohm balanced feeds for three different dielectric environments (free-space and half-spaces of permittivity 4 and 42, respectively). Thereby, the RF-chip incorporates three 100 Ohm balanced output ports that are connected to the antenna from whom only one can be selected to provide the output signal. The respective other two output ports are shorted by an internal switching circuit that is controlled by external DC voltages. The measurement of the reflection coefficient of the stand-alone antenna and the chip agree well with the simulations, allowing to interconnect these two components. Further, the radiation pattern of the whole system is measured for two different scenarios showing good functionalities.