DEFINING GTN PARAMETERS OF DP STEELS OF DIFFERENT ROLLING DIRECTIONS AND AT DIFFERENT STRAIN RATES-Reference-Cited by-同舟云学术

DEFINING GTN PARAMETERS OF DP STEELS OF DIFFERENT ROLLING DIRECTIONS AND AT DIFFERENT STRAIN RATES

Published:2022-07-18 Issue: Volume: Page:
ISSN:2718-0883
Container-title:Eurasian Journal of Science Engineering and Technology
language:en
Short-container-title:(EJSET)

Author:

TOPİLLA Labinot¹

Affiliation:

1. NIGDE OMER HALISDEMIR UNIVERSITY

Abstract

The microstructure of Dual Phases steel is known to be mostly composed of the ferrite phase, which offers ductility, and the martensite phase, which provides strength. However, the shapes, orientations and directions of the grains of these two phases are different and vary depending on the degree of observation. Therefore, the objective of this research was to compare the stress and strain distribution at different strain rates of standard specimens of DP steels, namely DP600 and DP800 steels. Besides, in this study, the finite element modeling method is used through optimization to determine the GTN fracture failure, constitutive and nucleation parameters of the mentioned steels based on their rolling directions and strain rates. The experimental and numerical simulation results are also compared, and are in good agreement.

Publisher

Omer Halisdemir Universitesi

Reference15 articles.

1. [1] A. S. Podder, D. Bhattacharjee, and R. K. Ray, “Effect of martensite on the mechanical behavior of ferrite-bainite dual phase steels,” ISIJ Int., vol. 47, no. 7, pp. 1058–1064, 2007, doi: 10.2355/isijinternational.47.1058.

2. [4] M. Achouri, G. Germain, P. Dal Santo, and D. Saidane, “Experimental characterization and numerical modeling of micromechanical damage under different stress states,” Mater. Des., vol. 50, pp. 207–222, 2013, doi: 10.1016/j.matdes.2013.02.075.

3. [5] M. Feucht, D.-Z. Sun, T. Erhart, and T. Frank, “Recent development and applications of the Gurson model,” in LS-DYNA Anwenderforum, 2006.

4. [6] F. Feng et al., “Application of a GTN damage model predicting the fracture of 5052-O aluminum alloy high-speed electromagnetic impaction,” Metals (Basel)., vol. 8, no. 10, 2018, doi: 10.3390/met8100761.

5. [7] K. L. Nielsen and V. Tvergaard, “Ductile shear failure or plug failure of spot welds modelled by modified Gurson model,” Eng. Fract. Mech., vol. 77, no. 7, pp. 1031–1047, 2010, doi: 10.1016/j.engfracmech.2010.02.031.

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Analysis of the Fracture Behaviour of Dual-phase Steels Using the GISSMO and Johnson Cook Models;Transactions of FAMENA;2023