Abstract
Background
Pre-analytical variables can have a significant adverse impact on the quality and credibility of coagulation test results. Therefore, correct and consistent identification of pre-analytical variables that compromise coagulation specimen quality is of paramount importance. Lack of standardization and heterogeneity among laboratory staff when assessing coagulation specimens can lead to inconsistent identification of these variables. Failure to recognize such pre-analytical variables results in the analysis of poor quality specimens and the authorization of spurious test results.
Objectives
To determine the impact of a laboratory staff training workshop on coagulation specimen rejection rates and to ascertain the level of knowledge of laboratory personnel concerning coagulation specimen rejection criteria before and after the workshop.
Methods
A retrospective three-month audit was performed with rejection data of incorrect blood to additive ratio, clotted, aged and haemolysed specimens collected. Training workshops and evaluation sessions were subsequently presented. A revised standard operating procedure delineating coagulation specimen rejection criteria was implemented and a repeat three-month audit was conducted.
Results
In total, 13 162 coagulation specimens were received during the initial audit with 1 104 specimens (8.39%) rejected. Following the workshops, the rejection rate increased by 3.49% to 11.88% with 12 743 coagulation specimens received and 1 514 specimens rejected. Evaluation sessions performed before and after the workshops revealed that 95.2% of attendees attained improved knowledge.
Conclusion
This study demonstrated the pivotal importance of regular laboratory staff training. The increase in specimen rejection following the workshops signifies their success in educating laboratory personnel regarding the correct identification of pre-analytical variables. Since most pre-analytical variables occur outside the laboratory, educational workshops need to be extended to non-laboratory personnel responsible for specimen collection and transport.
Publisher
Public Library of Science (PLoS)