Abstract
Background
The COVID-19 pandemic has infected hundreds of millions of people resulting in millions of deaths worldwide. While N95 respirators remain the gold standard as personal protective equipment, they are resource-intensive to produce and obtain. Surgical masks, easier to produce and obtain, filter ≥95% submicron particles but are less protective due to a lack of seal around a user’s face. This study tested the ability of a simple surgical mask modification using rubber bands to create a seal against particle exposure that would pass N95 standards.
Methods and findings
Forty healthcare workers underwent TSI PortaCount mask fit testing using an ASTM Level 1 surgical mask modified with rubber bands. Fit Factor was determined after testing four standard OSHA N95 fit testing scenarios. Performance of the properly-modified surgical mask was compared to that of a poorly-modified surgical mask, an unmodified standard surgical mask, and an N95 respirator. Thirty-one of forty (78%) healthcare workers passed Fit Factor testing using a properly-modified mask. The Fit Factor success rate significantly improved by subsequent test date (p = 0.043), but was not associated with any other participant characteristics. The average Fit Factor score for the properly-modified mask was 151 (SD 65.2), a significantly better fit than the unmodified mask score of 3.8 (SD 3.1, p<0.001) and the poorly-modified mask score of 24.6 (SD 48.4, p<0.001) but significantly lower than a properly fitted N95 score of 199 (SD 4.5, p<0.001).do.
Conclusions
Rubber bands, a low-cost and easily-accessible modification, can improve the seal and protective ability of a standard surgical mask to the level of an N95 respirator. This could mitigate N95 respirator shortages worldwide and provide individuals in under-resourced regions a practical means for increased personal respiratory protection.
Publisher
Public Library of Science (PLoS)
Reference22 articles.
1. WHO Coronavirus (COVID-19) Dashboard. World Health Organization. 2022 May 31 [Cited 2022 May 31]. https://covid19.who.int/.
2. Physical distancing, face masks, and eye protection to prevent person-to-person transmission of SARS-CoV-2 and COVID-19: a systematic review and meta-analysis;DK Chu;Lancet,2020
3. Covid-19 has caused a shortage of face masks. But they’re surprisingly hard to make;E Feng;National Public Radio,2020
4. Electronic Code of Federal Regulations. Title 42, Chapter I, Subchapter G, Part 84 –Approval of Respiratory Protective Devices. Office of the Federal Register, Government Publishing Office. 2020 Apr 16 [Cited 2021 May 5]. https://www.ecfr.gov/current/title-42/part-84.
5. ASTM F2100-21. ASTM International. 2021 [Cited 2022 May 31]. https://www.astm.org/f2100-21.html.