Affiliation:
1. a Environmental Processes Laboratory (LAPAM), Chemical Engineering Department, Federal University of Santa Maria – UFSM, Avenida Roraima 1000, 97105-900, Santa Maria, RS, Brazil
2. b Graduation Program in Technology of Materials and Industrial Processes, FEEVALE University, Novo Hamburgo, Brazil
Abstract
Abstract
It is imperative to remove phosphate from the aquatic system. This nutrient in excess can cause environmental problems such as eutrophication. Therefore, aiming to enhance phosphate removal, this work presents a novel adsorbent developed from the construction of Ca2+/Fe3+ layer double hydroxides (CaFe/LDH) supported onto biochar physically activated with CO2 [CaFe/biochar (CO2)]. Pristine biochar was produced from the pyrolysis of Eucalyptus saligna sawdust, activated with CO2, and then impregnated with CaFe/LDH. The CaFe/biochar (CO2) was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET). The characterization confirmed a proper synthesis of the new adsorbent. Experiments were conducted in the form of batch adsorption. Results indicated that the optimum pH and adsorbent dosage were 2.15 and 0.92 g L−1, respectively. Adsorption kinetics, isotherms, and thermodynamics were also evaluated. Adsorption kinetics and isotherms were better fitted by the pseudo n order and Freundlich models, respectively. Results also indicated a better adsorption capacity (99.55 mg·g−1) at 55 °C. The thermodynamic indicators depicted that the adsorption process was favorable, spontaneous, and endothermic. Overall, CaFe/biochar (CO2) could be potentially applied for the adsorptive removal of phosphate from an aqueous solution.
Subject
Water Science and Technology,Environmental Engineering
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献