Affiliation:
1. School of Infrastructure, Indian Institute of Technology Bhubaneswar, Argul, Bhubaneswar, Odisha 752050, India
Abstract
Abstract
In this study, the addition of bentonite at different proportions as clay minerals and various thicknesses (4, 5, and 6 mm) of ceramic membranes were evaluated for proton and oxygen mass transfer coefficients. Bentonite (20% and 4 mm) was found to be optimum and was then employed to assess earthen microbial fuel cell (EMFC) performance for different substrates (kitchen waste (KW) slurry and leachate) under batch mode. Both substrates were added in different concentrations of chemical oxygen demand (COD), i.e., 18, 15.2, 12.5, 9.7, and 6.9 g/L to EMFCs. The EMFC achieved superior organic removals for leachate (>96%). Intriguingly, the volatile fatty acids (VFAs) generation and consumption were different for each substrate. Each system expressed affinity towards acetic acid, but limited VFAs (acetic and propionic) were generated by KW while leachate generated acetic, propionic, and butyric. The leachate concentration having COD of 15.2 g/L produced the highest power density of 586.5 ± 38.8 mW/m3, while for KW, only 41.5 mW/m3 (6.9 g/L of COD for KW) was obtained. The study consolidates the need for an intermediate step to pre-treat the organic fraction of waste before its use for resource recovery. Bentonite was found as an effective clay mineral for manufacturing ceramic membranes.
Funder
Department of Science and Technology
Subject
Water Science and Technology,Environmental Engineering
Reference35 articles.
1. The anode potential regulates bacterial activity in microbial fuel cells
2. Methane production from municipal refuse: a review of enhancement techniques and microbial dynamics;Barlaz;Critical Reviews in Environmental Science and Technology,1990
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献