Alkaline subcritical-water treatment and alkaline heat treatment for the increase in biodegradability of newsprint waste

Abstract

This work describes two alkaline semicontinuous processes for the conversion of refractory organic materials into biodegradable substances. Newsprint was used as a lignocellulosic waste. Methane conversion efficiencies and cellulose removals were investigated for the two following processes: alkaline subcritical-water treatment (ASWT) coupled with methane fermentation and alkaline heat treatment (newsprint heated with steam in an autoclave; AHT) coupled with methane fermentation with a neutral subcritical-water treatment (NSWT) recycle. Results showed that for ASWT coupled with methane fermentation higher methane conversion efficiencies and higher cellulose removals were achieved as HRT increased. At HRT = 20 days, average CH4 conversion efficiency and average cellulose removal reached 26% and 44%, respectively. After a final HRT of 40 days, average CH4 conversion efficiency and average cellulose removal reached 50% and 60%, respectively. On the other hand, for AHT coupled with methane fermentation, methane conversion efficiencies did not show a greater improvement using this pretreatment process. Average conversion reached 9% with an average cellulose removal of 20%. In order to improve the yield of the reactor, approximately one-third of the effluent was recycled using NSWT (150°C; neutral pH). Methane conversion efficiency of this process increased as more recycles were performed. For the fifth operation, the total average methane conversion efficiency was 44% with a total average cellulose removal of 55%.