Integration of coliform decay within a CFD (computational fluid dynamic) model of a waste stabilisation pond

Abstract

CFD mathematical modelling offers the potential to predict the actual flow pattern in a pond rather than generalising its mixing and mass transport as either an ideal flow reactor or, in the case of the non-ideal flow reactor, as a single dispersion number. However, perhaps the greatest benefit that CFD offers over the previous approaches is its ability to directly account for physical influences on the pond hydraulics such as the addition of baffles for example. In addition to solving the equations of fluid flow, CFD modelling also allows incorporation of other equations. The next logical development is, therefore, the integration of a reaction model within its solution domain. This potential has been recognised by several researchers, but to date no such work has been published. The primary aim of this paper was to present a CFD model of a field pond that incorporates the first order decay equation for coliforms. Experimental monitoring of the field pond gave an average effluent concentration of 3,710 f.c./100 mL, while the CFD model predicted 4,600 f.c./100 mL. Considering the pond provides an order of magnitude decrease in faecal coliform concentration, the integrated CFD model has clearly predicted the treatment efficiency very well. The secondary aim of this paper was to demonstrate the potential application of this technique. A typical pond was designed and modelled along with two variations incorporating two baffles and six baffles respectively. As is typically found in pond systems, the standard design suffered from severe short-circuiting with the model predicting a value of 6.2 × 106 f.c./100 mL at the outlet. The simulations of the baffled designs illustrate how treatment efficiency was improved by reducing the short-circuiting through the pond. The model predicted values of 6.0 × 103 f.c./100 mL for the 2-baffle design and 5.7 × 102 f.c./100 mL for the 6-baffle design.