Affiliation:
1. School of Chemical and Biomolecular Engineering, The University of Sydney, NSW 2006, Australia
2. Sydney Water Corporation, PO Box 399 Parramatta, NSW 2124, Australia
Abstract
The performance of various commercially available epoxy mortar coatings was compared by measuring their sulphuric acid diffusivity. Apparent diffusivities, which were measured gravimetrically, were found to be dependent on coating tortuosity. In composite materials like epoxy mortars, the tortuosity was determined by filler properties and polymer alignment. Tortuosity was found to depend on the filler size, their dispersion, filler aspect ratio and concentration. The order and greater alignment of polymer aggregates, which characterises thinner coatings effects higher tortuosity and thus lower permeabilities. The result is that sulphuric acid diffusivities were observed to increase with coating thickness, which challenges the notion that greater coating thicknesses provide greater protection or environmental barrier. The effect of film thickness and filler properties observed in this study has significant implications to the current selection of coatings and sewer protection.
Subject
Water Science and Technology,Environmental Engineering
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献