Preparation of a hydrophobically associated cationic polyacrylamide and its regulation of the sludge dewatering performance

Abstract

Abstract A hydrophobically associating cationic polyacrylamide (HACPAM) was prepared by using a micellar polymerization method with V-50 (azobisisobutyramidine hydrochloride) as the initiator and acrylamide, acryloyloxyethyl trimethylammonium chloride and butyl methacrylate as substrates under ultraviolet light irradiation. Structural analysis using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and X-ray photoelectron spectroscopy analyses showed that the substrates were successfully polymerized. HACPAM was used to condition sludge to improve its dewatering performance, and the results showed that as the amount of HACPAM increases, the sludge dewatering performance is significantly improved, and 3.532 kg/t dry solids of HACPAM is regarded as the optimal amount. Compared with the commercially available cationic polyacrylamide (CPAM), HACPAM has a stronger hydrophobic group association effect, with better promotion of the conversion of bound water in sludge flocs into free water, thereby improving the sewage dewatering performance. The 3D spatial structure of dewatered sludge cakes analyzed by computed tomography technology showed that the number of pores of the dewatered sludge cake treated by HACPAM 3 was smaller than that of the cake treated by CPAM, with a reduction in the porosity of 68.8%, resulting in a better hydrophobic effect. In addition, the mechanism of HACPAM improving the dewatering performance is discussed.