Fabrication of ultrafiltration membranes by poly (aryl ether nitrile) with poly (ethylene glycol) as additives

Abstract

Abstract A new kind of flat sheet ultrafiltration membrane was prepared by a promising membrane material, poly (aryl ether nitrile) (PEN), via non-solvent induced phase separation. The effect of solvents, N-methyl-2-pyrrolidone (NMP) and dimethyl acetamide (DMAc), as well as additive of poly (ethylene glycol) (PEG) with different molecular weights on the structure and permeation performance of synthesized membranes were investigated. Comparing with NMP, DMAc is more suitable for the casting solution preparation due to better solubility. A gradually changing pore from sponge-like to finger-like can be observed when PEG was added with DMAc as solvent, while a finger-like pore structure always appears in the NMP system with or without PEG. In both systems, the formation of macrovoids is effectively promoted by the addition of PEG, and higher porosity membranes can be obtained by PEG with higher molecular weight. With the increase of PEG molecular weight from 400 to 10,000 Da, the permeate flux increases from 74.5 to 114.3 L·m−2·h−1 and from 102.0 to 130.8 L·m−2·h−1 under a 100 kPa pressure-driven when NMP and DMAc were used as solvents, respectively. The membranes prepared by DMAc exhibit outstanding rejection of BSA with rejections all above 96.5%.