Improvement of Existing Wastewater Treatment Plants' Efficiencies without Enlargement of Tankage by Application of the Linpor-Process

Improvement of Existing Wastewater Treatment Plants' Efficiencies without Enlargement of Tankage by Application of the Linpor-Process – Case Studies

Published:1990-07-01 Issue:7-8 Volume:22 Page:207-215
ISSN:0273-1223
Container-title:Water Science and Technology
language:en
Short-container-title:

Author:

Morper M.,Wildmoser A.

Abstract

The LINPOR process is a convenient method for upgrading activated sludge plants without enlargement of tankage. By filling up 15-30% of the aeration volume with highly porous plastic foam particles, which serve as a carrier for the active biomass, the total MLSS concentration is increased and the F/M ratio is lowered. Three examples of upgraded activated sludge plants are presented.

Publisher

IWA Publishing

Subject

Water Science and Technology,Environmental Engineering

Link

http://iwaponline.com/wst/article-pdf/22/7-8/207/101192/207.pdf

Cited by 21 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Nitrogen Removal by HN-AD Bacteria Immobilized on Modified Absorbent Stone;Chemical & biochemical engineering quarterly;2020

2. Energy, cost and design aspects of coarse- and fine-bubble aeration systems in the MBBR IFAS process;Water Science and Technology;2016-12-09

3. Effects of packing rates of cubic-shaped polyurethane foam carriers on the microbial community and the removal of organics and nitrogen in moving bed biofilm reactors;Bioresource Technology;2012-08

4. Quantification of kinetic parameters for heterotrophic bacteria via respirometry in a hybrid reactor;Water Science and Technology;2010-04-01

5. Comparison between hybrid moving bed biofilm reactor and activated sludge system: a pilot plant experiment;Water Science and Technology;2010-02-01