Optimization of the design parameters of the regenerative hitch installed in a logging vehicle with a trailer

Author:

Nikonov Vadim1,Posmetev Valeriy2,Zelikov V.3,Posmetev Viktor4,Chuykov Aleksey5

Affiliation:

1. Federal State Budget Educational Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G. F. Morozov»

2. Voronezh State University of Forestry and Technologies

3. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov

4. Voronezh State University of Forestry and Technologies named after G.F. Morozov

5. Belorusskiy gosudarstvennyy tehnologicheskiy universitet

Abstract

This article solves the problem of increasing the efficiency of the functioning of logging road trains in conditions of insufficiently equipped logging roads. Experience in the operation of road trains on such logging roads shows that on these roads the transport and operational qualities of logging road trains are low. The relevance of the scientific direction, aimed at achieving the fuel efficiency of logging road trains and thus increasing the efficiency and competitiveness of logging enterprises, is substantiated. An analysis of the work of foreign scientists is presented, which made it possible to identify significant factors that largely determine the efficiency of the process of hauling timber by timber road trains. A promising design of the coupling device is proposed, which allows converting and usefully using the kinetic energy of the mass of the trailer with timber, which occurs during the movement of a road train along insufficiently equipped logging roads in unsteady and transient traffic modes. The study was based on mathematical and simulation modeling, numerical methods, as well as modern methods for obtaining and processing information with computer support. A mathematical model and a computer program for the movement of a timber road train under changing road conditions have been developed. Computer simulation made it possible to carry out a preliminary assessment of the performance of the proposed pneumohydraulic coupling device with recuperative and damper mechanisms by identifying and analyzing dependencies characterizing the change in the studied performance indicators on the driving conditions of the road train and the design parameters of the device. It has been established that the coupling device during the movement of a logging road train in difficult road conditions at a speed of 30 km/h makes it possible to recuperate up to 7 kW, while the value of the longitudinal acceleration of the trailer link relative to the logging vehicle does not exceed 0.83 m/s2. It is determined that the value of the optimal diameter of the recuperative hydraulic cylinder is 80 ... 100 mm, and the optimal piston stroke is 83 ... 100 mm. In this case, the average power recuperated by the device will be at least 7 kW, and the average longitudinal acceleration of the trailer will be no more than 0.8 m/s2. It was found that the developed recuperation system remains effective in a wide range of roughness heights of 0.2 ... 0.4 m, providing a recuperated power of 2.3 ... 19.7 kW, respectively, with an acceptable average longitudinal acceleration of 0.3 ... 2.2 m/s2. The results obtained will be used as recommendations for designers to refine the proposed coupling device at the design stage.

Publisher

Voronezh State University of Forestry and Technologies named after G.F. Morozov

Subject

General Medicine

Reference20 articles.

1. Никонов, В. О. Современное состояние, проблемы и пути повышения эффективности лесовозного автомобильного транспорта : монография / В. О. Никонов ; М-во науки и высшего образования РФ, ФГБОУ ВО «ВГЛТУ». – Воронеж, 2021. – 203 с. – Библиогр. : с. 181-202 (196 назв.). Режимдоступа : https://www.elibrary.ru/item.asp?id=45694525, Nikonov, V. O. Sovremennoe sostoyanie, problemy i puti povysheniya effektivnosti lesovoznogo avtomobil'nogo transporta : monografiya / V. O. Nikonov ; M-vo nauki i vysshego obrazovaniya RF, FGBOU VO «VGLTU». – Voronezh, 2021. – 203 s. – Bibliogr. : s. 181-202 (196 nazv.). Rezhimdostupa : https://www.elibrary.ru/item.asp?id=45694525

2. Akay A. E. Determination of the Safest Route for Logging Trucks Based on Road Types and Conditions / A. E. Akay // Environ. Sci. Proc. 2021 3 5. Bibliogr. : p. 6 (12 titles). – DOI: http://doi.org/10.3390/IECF2020-08068, Akay A. E. Determination of the Safest Route for Logging Trucks Based on Road Types and Conditions / A. E. Akay // Environ. Sci. Proc. 2021 3 5. Bibliogr. : p. 6 (12 titles). – DOI: http://doi.org/10.3390/IECF2020-08068

3. Akay A. E. Evaluating the Effects of Improving Forest Road Standards on Economic Value of Forest Products / A. E. Akay, H. Serin, J. Sessions, E. Bilici, M. Pak // Croat. J. For. Eng. 42 (2021) 2 pp. 245-258. – Bibliogr. : pp. 257-258 (20 titles). – DOI: http://doi.org/10.5552/crojfe.2021.851, Akay A. E. Evaluating the Effects of Improving Forest Road Standards on Economic Value of Forest Products / A. E. Akay, H. Serin, J. Sessions, E. Bilici, M. Pak // Croat. J. For. Eng. 42 (2021) 2 pp. 245-258. – Bibliogr. : pp. 257-258 (20 titles). – DOI: http://doi.org/10.5552/crojfe.2021.851

4. Allman M. Operational Parameters of Logging Trucks Working in Mountainous Terrains of the western Carpathians / M. Allman, Z. Dudakova, M. Jankovsky, J. Merganic // Forests. 2021, 12, 718 – 13 p. – Bibliogr. : pp. 12-13 (27 titles). – DOI: http://doi.org/10.3390/f12060718, Allman M. Operational Parameters of Logging Trucks Working in Mountainous Terrains of the western Carpathians / M. Allman, Z. Dudakova, M. Jankovsky, J. Merganic // Forests. 2021, 12, 718 – 13 p. – Bibliogr. : pp. 12-13 (27 titles). – DOI: http://doi.org/10.3390/f12060718

5. Alrejjal A. Impact of crosswinds and truck weight on rollover propensity when negotiating combined curves / A. Alrejjal, K. Ksaibati // International Journal of Transportation Science and Technology, 2022. Bibliogr. : pp. 16-17 (52 titles). – DOI: http://doi.org/10.1016/j.ijtst.2022.01.001, Alrejjal A. Impact of crosswinds and truck weight on rollover propensity when negotiating combined curves / A. Alrejjal, K. Ksaibati // International Journal of Transportation Science and Technology, 2022. Bibliogr. : pp. 16-17 (52 titles). – DOI: http://doi.org/10.1016/j.ijtst.2022.01.001

Cited by 4 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3