Kabartı Türlerinin Saplama Kaynak Dayanımına Etkisinin Taguchi Yöntemiyle İncelenmesi-Reference-Cited by-同舟云学术

Kabartı Türlerinin Saplama Kaynak Dayanımına Etkisinin Taguchi Yöntemiyle İncelenmesi

Published:2023-06-14 Issue: Volume: Page:
ISSN:1302-0900
Container-title:Journal of Polytechnic
language:tr
Short-container-title:

Author:

KIR Hilal¹^ORCID,YAZAR Mustafa²^ORCID,TALAŞ Şükrü³^ORCID

Affiliation:

1. BURSA ULUDAG UNIVERSITY, FACULTY OF ENGINEERING-ARCHITECTURE, MECHANICAL ENGINEERING PR.

2. Şahinkul Makina ve Yedek Parça San. Tic. A.Ş.,Bursa

3. AFYON KOCATEPE UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING

Abstract

In this study, the effect of different weld projections on the mechanical properties of stud welds was analyzed using the Taguchi experiment planning method, using a projection welding machine with a capacity of 100 kVA with MFDC transformer. The samples were subjected to the tensile rupture force test with a destructive test device. The aim of this study was to ensure product safety by capturing the spot-welding quality, which is determined by the specifications of the automotive main industry, using a bolt with a lower weight. In this study, 1.5 mm WSS-M1A365-A11 uncoated steel sheet and 8.8 quality M6x1.00x25 triple projection uncoated welding bolts and 8.8 quality M6x1.00x18.5 ring shaped weld bolts were used as stud welding bolts. Different welding times, different welding currents and different welding clamping forces were used on the WSS-M1A365-A11 steel sheet samples in the stud welding operation with bolts. Taguchi analysis showed that ring shaped stud weld bolts required welding parameters of 32 ms welding time, 27 kA welding current and 500 daN welding force, while triple projection stud welding was found to perform the best optimum weld with 23 ms welding time, 18 kA welding current and 350 daN force.

Funder

Şahinkul Makina ve Yedek Parça Sanayi Tic. A.Ş.

Publisher

Politeknik Dergisi

Subject

Colloid and Surface Chemistry,Physical and Theoretical Chemistry

Reference27 articles.

1. [1] Paramonov, S.S., Bulychev, V.V., Maksimov, N.N., Ponomarev,A.I., “Improvement of zinc coated steel stamped part and steel nut projection welding process”, Materials Today: Proceedings, 38 (4), 1470-1473, (2021).

2. [2] Sejč, P. Belanová, J., Gábrišová, Z., Vanko, B., “The Influence of Parameters of the Resistance Projection Welding of M10 Steel Nuts to the Galvanized Steel Sheet DP 600 on Selected Joint Characteristics”, Manufacturing Technology, 20 (6), 822-833, (2020).

3. [3] Enrique P.D., Momani, H. A., Digiovanni, C., Jiao, Z., “Evaluation of Electrode Degradation and Projection Weld Strength in the Joining of Steel Nuts to Galvanized Advanced High Strength Steel”, Journal of Manufacturing Science and Engineering (J. Manuf. Sci. Eng.), 141 (10), (2019).

4. [4] Yetilmezsoy, K., Erhuy, C. G., Ateş, F., Bilgin, M.B., “Implementation of fuzzy logic approach to estimate the degree of expulsion and spattering index and weld strength in projection welding”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40:283, (2018).

5. [5] Mikno, Z., Stepień, M., & Grzesik, B., “Optimising the operation of servomechanical force systems used in the joining of thin-walled metal elements in the automotive industry”, 2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART), IEEE., Kuwait- Kuwait, pp. 1-8, (2015).