Affiliation:
1. KIRKLARELİ ÜNİVERSİTESİ
Abstract
This study investigates the tribological performances of commonly used stainless steel alloys (303, 304, 316L, and 420) to determine their suitability as construction materials for periodic structures designed for inertial amplification induced phononic band gap vibration isolators. Stainless steel alloys are extensively employed in engineering structures due to their ability to withstand large stresses and exhibit excellent cyclic loading properties. In this study, stainless steel specimens are examined by dry and lubricated wear test conditions. 420 stainless steel showed highest wear resistant properties for dry and lubricated conditions. Two grades of lubricants are compared in terms of viscosities, and it is revealed that higher viscosity blocked the flow of the lubricant so that semi-dry friction occurred. Low viscosity lubricant enabled less material removal due to friction.
Reference46 articles.
1. [1] Lo K. H., Shek C. H., and Lai J. K. L., “Recent developments in stainless steels,” Materials Science and Engineering: R: Reports, 65(4–6): 39-104, (2009).
2. [2] Baddoo N. R., “Stainless steel in construction: A review of research, applications, challenges and opportunities,” J Constr Steel Res, 64(11): 1199-1206, (2008).
3. [3] Gardner L., “The use of stainless steel in structures,” Progress in Structural Engineering and Materials, 7(2): 45-55, (2005).
4. [4] Rao S., Mechanical Vibrations, Prentice Hall, New Jersey, (2011).
5. [5] Inman D., Engineering Vibration. Pearson Education, New Jersey, (2014).