Optimization of structural and technological modes of operation of the microwave wax melter-Reference-Cited by-同舟云学术

Optimization of structural and technological modes of operation of the microwave wax melter

Published:2023-01-14 Issue:11 Volume:1 Page:88-93
ISSN:2686-701X
Container-title:Agrarian science
language:
Short-container-title:Agrarnaâ nauka

Author:

Shevelev A. V.¹^ORCID,Mikhailova O. V.¹^ORCID,Prosviryakova M. V.²^ORCID,Novikova G. V.¹,Kirillov N. K.³^ORCID,Toboev G. M.³^ORCID

Affiliation:

1. Nizhny Novgorod State Engineering and Economic University

2. Russian State Agrarian University – Moscow Timiryazev Agricultural Academy

3. Chuvash State Agricultural University

Abstract

Introduction. The research is aimed at substantiating the optimal design and technological parameters and operating modes of the microwave installation being developed, designed to implement the process of processing wax raw materials with preliminary separation and preservation of honey fraction contained therein.Methodology. The effective modes of heat treatment of apiary raw materials in a microwave wax melter were determined through regression models obtained during the implementation of the matrix of threefactor active planning of a multifactorial experiment.Results. The main factors influencing the process of heat treatment of the sail are revealed: the specific power of microwave energy generators, the duration of exposure to the electromagnetic field of super high frequency, the humidity of the feedstock. The expediency of implementing microwave technology for processing wax raw materials in a two-module installation containing hemispherical resonators to ensure continuous operation in compliance with electromagnetic safety, as well as control of technological parameters is proved.

Publisher

Agrarian Science

Subject

General Medicine

Reference15 articles.

1. Lukina D., Belov V., Lukina O., Volkov A., Mayorov A., Smirnova I. Increasing the efficiency of the operation of the facilities for the thermal processing of raw materials by exposure to electromagnetic radiation. Key engineering materials. 2018; 781. 185. DOI: https://doi.org/10.4028/www.scientific.net/KEM.781.185 (In Russian).

2. Filippov R. L. Intensification of technological processes of processing bee products by electromagnetic energy. Ph. D. (Engineering) diss. Kharkiv, 1990; 498. (In Russian).

3. Kireev Yu. V., Kireev A. Yu., Gnatenko G. G. Wax processing technology with the use of microwave electromagnetic field energy. Researched in Russia. 2004; 7. 1109. (In Russian).

4. Dunaeva T. Yu., Fokin A. N. Processing of zabrus in a microwave oven. Beekeeping. 2011; 8. 54. (In Russian).

5. Maksimov N. M., Morozov V. V. Promising technology of processing wax raw materials in apiaries using a steam generator. Traditions and innovations in the development of agriculture. 2019; 493. (In Russian).