In-situ studies on environmental degradation in Al 7075 in saltwater environment under tensile loading

Abstract

Abstract We report the crack growth on peak aged Al 7075 under tensile loading in a saltwater environment to investigate whether hydrogen plays a role in the initiation and the subsequent growth of the crack. As the hydrostatic stress is at a maximum ahead of the notch, it has been speculated that hydrogen would diffuse to region of maximum hydrostatic stress and initiate the crack. An elastic-plastic finite element (FE) model is developed to determine the stress distribution around the circular notch at the edge of the plate. The crack growth was monitored using a camera attached with an optical microscope, and various regimes corresponding to hydrogen evolution, pit formation and growth, crack nucleation and initial growth and rapid crack growth leading to failure have been identified. We observe the crack was nucleated in a region associated with the highest hoop stress instead of the maximum hydrostatic stress from the base of a pit at the circular notch. We demonstrated the crack growth rate in a salt water environment is governed mostly by the dissolution of grain boundary MgZn2 precipitate, rather than the hydrogen induced decohesion mechanism.