The importance of phase composition for corrosion resistance and thermal oxidation behavior of gas-borided layer produced on nickel alloy-Reference-Cited by-同舟云学术

The importance of phase composition for corrosion resistance and thermal oxidation behavior of gas-borided layer produced on nickel alloy

Published:2021-04-08 Issue:0 Volume:0 Page:
ISSN:2191-0316
Container-title:Corrosion Reviews
language:en
Short-container-title:

Author:

Makuch Natalia¹,Dziarski Piotr¹

Affiliation:

1. Institute of Materials Science and Engineering, Poznan University of Technology , Pl. M. Skłodowskiej-Curie 5 , 60-965 Poznan , Poland

Abstract

Abstract Gas boriding was used to produce the borided layer containing a mixture of chromium and nickel borides on the Inconel®600-alloy. The borided sample was characterized by a higher corrosion potential (−0.953 V) than the non-borided sample (−1.005 V). The corrosion current density was significantly lower for the borided sample. The oxidation at 1000 °C for 24 h caused the formation of different oxides on the surface of the borided sample. Simultaneously, the presence of nickel and chromium borides was confirmed by XRD analysis after the oxidation test. It was concluded, that the gas boriding could be an effective barrier against corrosion and oxidation of Inconel®600-alloy.

Publisher

Walter de Gruyter GmbH

Subject

General Materials Science,General Chemical Engineering,General Chemistry

Reference27 articles.

1. Ataibis, V. and Taktak, S. (2015). Characteristics and growth kinetics of plasma paste borided Cp–Ti and Ti6Al4V alloy. Surf. Coating. Technol. 279: 65–71, https://doi.org/10.1016/j.surfcoat.2015.08.023.

2. Aytekin, H. and Akcin, Y. (2013). Characterization of borided Incoloy 825 alloy. Mater. Des. 50: 515–521, https://doi.org/10.1016/j.matdes.2013.03.015.

3. Campos-Silva, I., Flores-Jiménez, M., Rodríguez-Castro, G., Hernández-Sánchez, E., Martínez-Trinidad, J., and Tadeo-Rosas, R. (2013). Improved fracture toughness of boride coating developed with a diffusion annealing process. Surf. Coating. Technol. 237: 429–439, https://doi.org/10.1016/j.surfcoat.2013.05.050.

4. Duan, Y., Li, P., Chen, Z., Shi, J., and Ma, L. (2018). Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding. J. Alloys Compd. 742: 690–701, https://doi.org/10.1016/j.jallcom.2018.01.383.

5. Duan, Y., Wang, X., Liu, D., Bao, W., Li, P., and Peng, M. (2020). Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature. Ceram. Int. 46: 16380–16387, https://doi.org/10.1016/j.ceramint.2020.03.197.

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Micro- and nano-mechanical approach to fracture toughness determination of borided layer produced on Nimonic 80A-alloy;Journal of Alloys and Compounds;2024-03

2. The Boriding Process for Enhancing the Surface Properties of High-Temperature Metallic Materials;Coatings for High-Temperature Environments;2023-12-06

3. Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718;Materials Characterization;2022-09

4. Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy;Materials Characterization;2022-04

5. Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics;Metals and Materials International;2021-09-28