Affiliation:
1. Mechanical Engineering Department , Faculty of Engineering, Al-Azhar University , Cairo , Egypt
2. Reactors Department , Nuclear Research Center, Egyptian Atomic Energy Authority , Cairo , Egypt
Abstract
Abstract
In this work, a three-dimensional study is conducted for silicon ingot irradiation facility in a typical MTR reactor. The silicon ingot heat generation is allowed to change around its nominal value in the range of 0.25, 0.5, 0.75, 1.0, and 1.25 W/g. The dimensionless clearance ratio ζ between the ingot and the outer casing is changed for values of 0.01, 0.05, 0.1, 0.15, and 0.2. The computational fluid dynamics code ANSYS FLUENT is employed to carry out these calculations. The temperature profile inside the silicon ingot during irradiation is of significant importance for uniform doping. Therefore, the impact of Rayleigh number and dimensionless clearance ratio ζ on the radial and axial temperature profiles through the ingot is reported. A best estimate correlation for the silicon irradiation facility global Nusselt number in terms of Rayleigh and dimensionless clearance ratio is presented. The dimensionless clearance ratio ζ value of 0.05 gives the best thermal hydraulic performance. Comparison with the available experimental correlations in the literature shows good agreement.
Subject
Safety, Risk, Reliability and Quality,General Materials Science,Nuclear Energy and Engineering,Nuclear and High Energy Physics,Radiation
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献