Thermal-hydraulic performance prediction of two new heat exchangers using RBF based on different DOE

Abstract

Abstract Thermal performance prediction with high precision and low cost is always the need for designers of heat exchangers. Three typical design of experiments (DOE) known as Taguchi design method (TDM), Uniform design method (UDM), and Response surface method (RSM) are commonly used to reduce experimental cost. The radial basis function artificial neural network (RBF) based on different DOE is used to predict the thermal performance of two new parallel-flow shell and tube heat exchangers. The applicability and expense of ten different prediction methods (RBF + TDML9, RBF + TDML18, RBF + UDM, RBF + TDML9 + UDM, RBF + TDML18 + UDM, RBF + RSM, RBF + RSM + TDML9, RBF + RSM + TDML18, RBF + RSM + UDM, RSM) are discussed. The results show that the RBF + RSM is a very efficient method for the precise prediction of thermal-hydraulic performance: the minimum error is 2.17% for Nu and 5.30% for f. For RBF, it is not true that the more of train data, the more precision of the prediction. The parameter “spread” of RBF should be adjusted to optimize the prediction results. The prediction using RSM only can also obtain a good balance between precision and time cost with a maximum prediction error of 14.52%.