Optimization of cutting parameters by thrust force and time for drilling of aluminum 2024 T351
Author:
Turgut Yunus Zubeyir1, Ozsoy Murat2ORCID
Affiliation:
1. Sakarya University Institute of Natural Science , Serdivan , Sakarya , Türkiye 2. Department of Mechanical Engineering , Sakarya University , Sakarya Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü , Serdivan , Sakarya , 54050 , Türkiye
Abstract
Abstract
In this study, the cutting parameters were optimized according to the thrust force and operation time in the drilling of Al 2024 T351 alloy, which is preferred in the aerospace industry and therefore subjected to thousands of drilling processes with liquid cooling. Cutting speed (70, 90, and 110 m min−1) and feed rate (0.08, 0.1, and 0.12 mm tooth−1) were considered cutting parameters. Experiments were performed three tool types (HSS, HSSE-Co5, HSSE-Co5 TiAlN coated). Taksan TMC-700 V CNC vertical machining center with FANUC control panel was used for drilling, and ESIT AX3 load cell and NI cDAQ-9188, data acquisition system, were used for data collection. Signal noise was reduced by applying the exponential smoothing method to all force data obtained in the experiments. The maximum forces in the machining direction (z-axis) were determined for each hole. The time was calculated during the computer aided manufacturing process. Response surface optimizations, variance analyses (ANOVA), and regression analyses were performed using these determined maximum thrust forces and measured time.
Publisher
Walter de Gruyter GmbH
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference20 articles.
1. A. Yıldız, “Simulation of drilling operation and examination of mechanical stresses according to variation in cutting parameters in drilling operations,” PhD. dissertation, Institute of Natural Sciences, Gazi University, Ankara, Turkey, 2021. 2. M. Nouari, G. List, F. Girot, and D. Géhin, “Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys,” Int. J. Mach. Tool Manufact., vol. 45, nos. 12–13, pp. 1436–1442, 2005, https://doi.org/10.1016/j.ijmachtools.2005.01.026. 3. Z. Zhu, B. He, and J. Chen, “Evaluation of tool temperature distribution in MQL drilling of aluminum 2024-T351,” J. Manuf. Process., vol. 56, pp. 757–765, 2020, https://doi.org/10.1016/j.jmapro.2020.05.029. 4. E. P. Bonhin, S. David-Müzel, E. S. Guidi, E. C. Botelho, and M. V. Ribeiro, “Influence of drilling parameters on thrust force and burr on fiber metal laminate (Al 2024-T3/glass fiber reinforced epoxy),” Procedia CIRP, vol. 101, pp. 338–341, 2020, https://doi.org/10.1016/j.procir.2021.02.035. 5. L. Kutlu, “Experimental investigation and taguchi optimization for the effect of cutting parameters on the drilling of Al 2024-T4 alloy with diamond like carbon coated drills,” MSc. thesis, Institute of Natural Sciences, Marmara University, Istanbul, Türkiye, 2009.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|