Exfoliation behavior of EN AW 7020 with T6, step aging and ultrasonic impact peening processes-Reference-Cited by-同舟云学术

Exfoliation behavior of EN AW 7020 with T6, step aging and ultrasonic impact peening processes

Published:2024-03-18 Issue:5 Volume:66 Page:687-695
ISSN:0025-5300
Container-title:Materials Testing
language:en
Short-container-title:

Author:

Yurdgülü Halil Ibrahim¹,Sadeler Recep¹^ORCID,Koç Barış²

Affiliation:

1. 162316 Atatürk Üniversitesi Mühendislik Fakültesi 25200 , Erzurum , Türkiye

2. 249046 FNSS Savunma Sistemleri AS , Ankara , Türkiye

Abstract

Abstract In this study the effect of T6 heat treatment, two-step aging treatment and ultrasonic impact peening on the exfoliation corrosion behavior of welded EN AW 7020 was investigated. Exfoliation tests were performed according to the ASTM G34-01 standard. As expected, as a result of the tests, the base material region of all three samples were showed better corrosion resistance than the heat-affected region. Ultrasonic impact peening and two-step aging treatment was observed that improved EXCO sensitivity in the weld area. When sorting was made by considering the resistance to corrosion of the heat affected zone of the samples, it was observed that the best resistance was shown by the sample with two-step aging treatment, and the worst resistance was shown by the sample with T6 heat treatment.

Funder

Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Atatürk Üniversitesi

FNSS SAVUNMA SİSTEMLERİ A.Ş.

Publisher

Walter de Gruyter GmbH

Link

https://www.degruyter.com/document/doi/10.1515/mt-2023-0373/pdf

Reference41 articles.

1. O. O. Ojo, E. Taban, and E. Kaluc, “Friction stir spot welding of aluminum alloys: a recent review,” Mater. Test., vol. 57, nos. 7–8, pp. 609–627, 2015. https://doi.org/10.3139/120.110752.

2. M. Lech-Grega, S. Hawryłkiewicz, M. Richert, and W. Szymański, “Structural parameters of 7020 alloy after heat treatment simulating the welding process,” Mater. Charact., vol. 46, nos. 2–3, pp. 251–257, 2001. https://doi.org/10.1016/S1044-5803(01)00133-4.

3. V. Mohanavel and M. Ravichandran, “Experimental investigation on mechanical properties of AA7075-AlN composites,” Mater. Test., vol. 61, no. 6, pp. 554–558, 2019. https://doi.org/10.3139/120.111354.

4. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W. Miller, “Recent development in aluminium alloys for aerospace applications,” Mater. Sci. Eng., vol. 280, no. 1, pp. 102–107, 2000. https://doi.org/10.1016/S0921-5093(99)00674-7.

5. F. Ran, L. Chai, K. Gao, Z. Nie, and Z. Chen, “Influence of various aging treatments on microstructure, strength and corrosion behaviour of high Zn content Al–Zn–Mg–Cu alloy,” Corros. Eng., Sci. Technol., vol. 49, no. 8, pp. 712–718, 2014. https://doi.org/10.1179/1743278213Y.0000000139.