Corrosion cracking resistance of hoisting ropes-Reference-Cited by-同舟云学术

Corrosion cracking resistance of hoisting ropes

Published:2024-01-29 Issue:0 Volume:0 Page:
ISSN:0025-5300
Container-title:Materials Testing
language:en
Short-container-title:

Author:

Karasu Haşim Fırat¹^ORCID,Demirsoy Mine¹

Affiliation:

1. Department of Mechanical Engineering , 37508 Dokuz Eylül University , Tınaztepe Campus Buca/Izmir , Izmir , 35397 , Türkiye

Abstract

Abstract The corrosion occurring in hoisting ropes used in transport machinery, directly and indirectly, significantly damages the global economy every year. The aim of this study is to investigate the behavior of different types of steel wire hoisting ropes used in cranes, ships, and ports, regarding their resistance to corrosion through the method of stress corrosion cracking and to determine which types of steel ropes should be utilized in environments exposed to severe corrosion. First of all, hessian and steel core ropes were selected from 6 × 19 Standard, 8 × 19 Seale, and 6 × 36 Warrington Seale rope groups of the same diameter. Prestress corrosion tests of the ropes were carried out based on the ASTM G49 standard, with the prestress corrosion test device designed and manufactured in accordance with different rope types. The results obtained by performing appropriate treatment methods against corrosion, such as hot-dip galvanizing and painting with zinc epoxy primer, were compared with the test results of ungalvanized ropes. Thus, the degree improvement against corrosion was determined.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://www.degruyter.com/document/doi/10.1515/mt-2023-0219/pdf

Reference33 articles.

1. M. Demirsoy, Transport Tekniği Kaldırma Makinaları, İstanbul, Turkey, Birsen Yayınevi, 2015.

2. J.-M. I. Hardin, On Path Independence of Axially Loaded Wire Rope Strands, USA, Ph.D. dissertation, University of Illinois, 1998.

3. M. Mallick, S. K. Mitra, and D. Basak, “Corrosion behaviour of FLC wire ropes,” Int. J. Sci. Res., vol. 3, no. 8, pp. 816–819, 2014.

4. M. Meknassi, A. Tijani, N. Mouhib, and M. El Ghorba, “Experimental study on corrosion of wire rope strands under sulfuric acid attack,” Int. J. Sci. Eng., vol. 5, no. 6, pp. 40–45, 2016.

5. M. Meknassi, N. Mouhib, A. Tijani, and M. El Ghorba, “Experimental study of wires extracted from steel wire rope and exposed to sulfuric acid,” Int. J. Mech. Eng., vol. 3, no. 11, pp. 47–53, 2015.